HONG KONG SUNRISE MATERIALS CO., LIMITED
Hong Kong Sunrise Materials CO., Limited
Add to Cart
Galvalume Steel Coil
Galvalume / ALU - ZINC Steel Coil , 55% Aluminum Content , Regular Spangles , AFP
| Specification | |||||
| Thickness | 0.15-3.5mm | ||||
| Thickness tolerance | +/- 0.01mm , | ||||
| Width | 600-1250mm | ||||
| Width tolerance | +/- 2mm | ||||
| Length | As to client's require | ||||
| Zinc coating | 40g-150g | ||||
| Standard | ASTM, AISI, DIN, GB,JIS | ||||
| Grade | SGCC,DC51D,DX51D,DX52D,,SGCD,Q195,Q235,SGHC,DX54D, S350 GD, | ||||
| S450 GD,S550 GD ect. | |||||
| Type | Steel coil, steel sheets/ plates, corrugated steel sheets/plates | ||||
| Technique | Hot rolled, cold rolled, galvalume / Alu-zinc | ||||
| Spangle type | Mini/regular/big/zero spangle | ||||
| Surface treatment | Chromed with passivation / environmental chromed | ||||
| Oiled/slightly oiled/ dry/ anti-fingerprint / skinpassed | |||||
| Packing | Export standard. | ||||
| Min order | 50 tons | ||||
| Coil weight | 4-6 tons | ||||
| Steel Type | AS1397-2001 | EN 10215-1995 | ASTM A792M-02 | JIS | ISO 9364-2001 |
| G3312:1998 | |||||
| Steel for Cold Forming and Deep Drawing Application | G2+AZ | DX51D+AZ | CS type B,type C | SGLCC | 1 |
| G3+AZ | DX52D+AZ | DS | SGLCD | 2 | |
| Structural Steel | G250+AZ | S250GD+AZ | 255 | - | 250 |
| G300+AZ | - | - | - | - | |
| G350+AZ | S350GD+AZ | 345 Class1 | SGLC490 | 350 | |
| G550+AZ | S550GD+AZ | 550 | SGLC570 | 550 | |
Application
1. Architecture Roofs and outside walls of civilian and industrial buildings, garage doors, fencings and window blinds
2. Appliances Industry Outer clad sheets for washing machine, refrigerator, television, air conditioner and ventilation system, explosion-proof strip, solar water heater and appliance parts
3. Auto Industry Muffler, heat shields of exhaust pipe and catalytic converter, auto parts & accessories under the frame, signboard in highway
4. Industrial Instruments Electric control cabinet, industrial refrigeration equipment, automatic vending machine
Features:
Good corrosion resistance
1)Under various environmental conditions, Galvalume exhibit excellent corrosion resistance
than galvanized steel sheet of the same thickness,and its service life is 2-6 times
that of ordinary galvanized steel.Galvanized parts due to the deformation of
micro-cracks less than galvanizing, thus forming region is much higher than the
corrosion resistance hot dip galvanized.
2)There are examples of the use of the roof for 20 years in North America.
3)It sort of life: rural industrial atmosphere --- --- --- general atmosphere of severe marine
sub-marine atmosphere
Good thermal properties
(1) Heat resistance: general galvanized products typically use temperature does not exceed 230 ℃,
reached 250 ℃ when will change, but long-term use galvanized plate at 315 ℃ environment.
(2) heat-reflective good: its reflection coefficient is hot galvanized plate twice in the summer can
reduce the indoor temperature, reducing air conditioning electricity consumption.
Aluminum (300G / M2): 40H / WATT / M2
Galvalume (150G / M2): 65H / WATT / M2
Galvanized (275G / M2): 120H / WATT / M2
Asbestos / cement: 150H / WATT / M2
Good surface properties
Small and uniform spangle
1.Color is bright silver
2.High surface hardness (scratch is not easy to rub)
3.A plurality of colors may be applied a semipermeable membrane
Good paintable
Galvalume when used as a tablet or other purposes by spray coating, degreasing simply without
the need for pre-treatment or etching treatment, because of its coating and the coating has a
good combination of polarity, and hot-dip galvanizing layerIt is not.
Relatively light weight
Because of galvanized steel plating lighter, in the case of the same coating thickness is greater
than the developed area per ton of galvanized steel, with 0.48MM, plating 40μm (both sides),
for example, its weight and tons of steel per square expand area as follows:
Weight per square meter per ton of steel to expand the area
